Our HBS Line-up of Studwelding Equipment are a popular choice among our clients that wish to maximize their return on investment. These controllers employ a thermal-controlled cooling fan and a wind tunnel cooling system, this ensures that the most critical components such as the main control board and the capacitors are the first to get cooled by the fresh air intake. The handheld stud guns are designed with a full linear bearing in place where plastic bushings are typically used between the moving parts. This ensures the most reliable and trouble free operation, while minimizing maintenance costs.
Premium Studwelding Syst
- Utilizes the latest inverter technology
- Energy efficient - uses 30% less energy than traditional transformer systems
- Highest weld cycle of its class (up to 40 studs per minute)
- Max output of 220 Volts and 1,600 Ws of weld energy
- This controller will weld 1/4" diameter CD studs working at only 80% of its max capacity
- Lightweight - 20% lighter than traditional transformer systems
Highest Level of Quality and Safety:
- IP 23 - The highest possible protection of its class
- Cooling channel - cools down the most critical components first
- Suitable for both in shop and job site applications
Welding Range | #4-40 to 1/4" diameter flanged studs in mild and stainless steel #4-40 to #10 diameter flanged studs in aluminum (when properly equipped) |
|---|---|
| Welding Material | Mild steel, stainless steel, aluminum and brass |
| Welding Rate | #4 (M3) = 40 studs/min (Charging voltage 60V) 1/4" (M6) =18 studs/min (Charging Voltage 160 V) |
| Capacitance | 66,000 μF |
| Welding Time | 1 to 3 msec |
| Weld Energy | 1,600 Ws |
| Charging Voltage | 50 to 220 V (stepless voltage regulation) |
| Primary Power | 115 V, 50/60 Hz, 10 AT |
| Power Source | Capacitor |
| Cooling Type | Wind Tunnel Type - With Thermal Controlled Cooling Fan |
| IP-Code | IP 23 |
| Dimension LxWxH | 15.75" x 8.07" x 9.84" (400 x 205 x 250 mm) without handle |
| Weight | 30.87 lbs (14 kg) |
