Our HBS Line-up of Studwelding Equipment are a popular choice among our clients that wish to maximize their return on investment. These controllers employ a thermal-controlled cooling fan and a wind tunnel cooling system, this ensures that the most critical components such as the main control board and the capacitors are the first to get cooled by the fresh air intake. The automated stud guns are designed with a full linear bearing in place where plastic bushings are typically used between the moving parts. This ensures that the equipment will maintain its tight tolerances while remaining reliable, trouble free and minimizing maintenance costs.
Premium Automated Studwelding System:
- Fully automated studwelding controller, interfaces with compatible vibratory feeder bowl and automated weld head.
- Utilizes the latest inverter technology
- Weld feedback system - controller will halt the process if it detects possible contaminants in the weld zone.
- Energy efficient - uses 30% less energy than traditional transformer systems.
- Highest weld cycle of its class (up to 40 studs per minute).
Application:
- CD technology - suitable for thinner materials and will not cause burn-through markings.
- Suitable for high volume production applications.
- Recommended for holding the tightest tolerances.
| Welding Range | #4-40 to 5/16" diameter flanged studs in mild and stainless steel #4-40 x 1/4" diameter flanged studs in aluminum |
|---|---|
| Welding Material | Mild steel, stainless steel, aluminum and brass |
| Welding Rate | #6 (M3) = 40 studs/min. (Charging voltage 60 V) 5/16" (M8) = 21 studs/min. (Charging voltage 170 V) |
| Capacitance | 99,000 μF |
| Weld Time | 1 to 3 msec |
| Weld Energy | 2,400 Ws |
| Charge Voltage | 50 to 220 V (stepless voltage regulation) |
| Primary Power | 115 V, 50/60 Hz, 15 AT |
| Power Source | Capacitor |
| Cooling Type | Wind Tunnel Type - With Thermal Controlled Cooling Fan |
| IP Code | IP 21 |
| Dimension LxWxH | 570 x 285 x 290 mm (without handle) |
| Weight | 57 lbs (26 kg) |
